EASY MSP430 LaunchPad ISP with only 4 wires!!!



now, i would like to show you how to turn your own launchpad into a ISP with only 4 wires!!!


in the example i use MSP430G2231, but you can replace it with any 430 families chip, whether 14pins or 20pins

原文

=============================
Need list:

1. only 4 dupont wires (with one side male and other side female)
2.launchpad breadboard

Step 1:

connect them like followings, this example is 14pins chip

 Vcc <---> pin1

 GND <---> pin14

 TEST <---> pin11

 RST <---> pin10

if your chip is 20pins, you can do like this

Vcc <---> pin1

GND <---> pin20

TEST <---> pin17

RST <---> pin16

Step 2:

if previous picture is not clear, maybe this can help you,


at last, you can upload your program by Energia or CCS something else

and it done!!



hope you enjoy~~~


and you must want to know how to make your MSP430 IC work independently(without launchpad board)

沒有留言:

張貼留言